Theo FÖRCH GmbH & Co.KG

We only sell to traders

Facade Adhesive Foam

PRODUCT INFORMATION:

  • Moisture-hardening single component PU adhesive foam for efficient, clean, cost-saving and long-term secure adhesion of thermal insulation panels (EPS) to the façade
  • DIBt tested and approved (Cl.33.9-1247)
  • Construction material class B1 in accordance with DIN 4102, Part 1
  • Suitable construction substrates: Masonry, aerated concrete, standard concrete, plaster and wood
  • Slight post-expansion
  • Elastic, does not become brittle
  • Suitable for vertical and overhead bonding applications
  • Cures quickly
  • Resistant to ageing (not UV-resistant)
  • Water-resistant (not waterproof)

Usage instructions:

  • The instructions provided by the insulation material manufacturer must be observed
  • Please read our technical data sheets at
    en.foerch.com/service/downloads
  • Technical data
    Basis:Single component polyurethane
    Construction materials class (DIN 4102
    Part 1):B 1 (flame-retardant)
    Consistency:Firm, does not sag
    Coverage:approx. 50 m
    approx. 17 m²
    (3 strands / metre)
    Processing time:approx. 6 min.
    (30 mm adhesive strip)
    Curing time:approx. 60 min.
    (30 mm adhesive strip)
    Capable of load bearing:after approx. 12 hours
    Temperature resistance:-40 °C to +90 °C
    (momentarily +100 °C)
    Adhesive surface processing temperature:-5 °C to +35 °C
    Material processing temperature:+5 °C to +25 °C
    Tensile strength (DIN EN 1607):0.160 – 175 kPa
    Shear strength (DIN EN 12090):0.11 N/mm²
    Tensile stress:164 kPa
    Shear modulus (DIN EN 12090):0.61 N/mm²
    Adhesive pull strength as per ETAG 004:approx. 100 kPa
    Subsequent expansion:slight
    Thermal conductivity (DIN 52612):approx. 0.035 W / (m × K)
    Shelf life:18 months
    (at +5 °C to +25 °C)
    Colour:amber
  • Usage