Theo FÖRCH GmbH & Co.KG

We only sell to traders

2K-HS-Filler L290


Fast-drying, high-solid acrylic filler with outstanding stability for high layer thicknesses (up to 300 µm)

  • Outstanding stability (no drop-in)
  • Very quick-drying
  • Excellent wet-in-wet application (no sanding in between)
  • High layer thickness (up to 300 µm dry film)
  • Outstanding sandability
  • High degree of rust protection due to anti-corrosive pigments

Fields of application:

For filling sanded paints, factory-primed or spackled surfaces. For the surface treatment of vehicle paints of various surfaces. Excellent compensation at sanblasting surfaces due to high filling power.


  • Hardened old paints, factory-primed new parts, spackled surfaces
  • For slightly uneven surfaces (high filling power)
  • For aluminium and galvanized surfaces we recommend a pre-priming with e.g. 1K-Universal Primer L286
  • Overpaintable with all common paints
  • Can not be coated with filler
  • Not suitable for powder-coatings
  • Tipp: When applying as wet-in-wet filler add up to 25 % of acrylic thinner R508. Longer aeration times.


  • 4:1 with 2K-Acryl HS-Hardener L280 and Acrylic Thinner R508 (Art.-No. 6130 1595)

Application equipment:

  • Spray guns
  • Spray gun nozzle at least Ø 1.7 mm; in case of wet-in-wet application with nozzle at least Ø 1.4 mm
  • Breathing protection mask filter type: A2 / A2 P3 (Art.-No. 5403 6815)


  • Light-grey, sand-beige
This information is only a recommendation based on our experiences. Preliminary tests required. Please check colour fastness prior to use!